← All insightsInsights

Analogue, SIP or VoLTE: Which Connection Suits Your Hotel?

A retro telephone can look like 1921 or 1965, but behind the shell it has to work with the system your hotel runs today. Every Opis hotel telephone is available with analogue, SIP/VoIP and VoLTE connectivity, so the choice depends on your building, not on the model you like. This guide helps you pick.

Five Opis retro telephones in a row on a hotel reception counter: a wooden candlestick phone, a pink rotary phone, a red wall phone on a walnut panel, a black 1960s rotary phone and a light-blue push-button phone

Analogue: when the building already has copper

Analogue models accept a standard FXS line and follow ITU-T loop signalling. They suit properties with a traditional analogue PBX and existing room cabling, such as a renovated heritage hotel that kept its old telephone wiring.

Choose analogue if: your PBX has analogue extension ports and the room wiring is intact.

SIP/VoIP: when the hotel runs on IP

The VoIP models support SIP v1 (RFC 2543) and SIP v2 (RFC 3261) and connect to modern hotel PBX and VoIP systems. Opis has verified compatibility with 3CX, Mitel and Avaya in its own tests. Codec support depends on the model and includes G.711a, G.711µ, G.722, G.729a and Opus.

Choose SIP/VoIP if: the hotel already uses an IP phone system, or is renovating and can run network cabling.

VoLTE: when there is no fixed line

VoLTE models are SIM-based and work without room cabling, which makes them a good fit where cabling is limited, for example in a listed building where walls cannot be opened. They work on all major European mobile networks.

Choose VoLTE if: you cannot add cabling, or the property has no suitable fixed line.

Which one for which situation

Your situationConnection
Analogue PBX, existing room wiringAnalogue
IP phone system, network cabling availableSIP/VoIP
3CX, Mitel or Avaya systemSIP/VoIP (compatibility verified in Opis' own tests)
Listed building, no new cablingVoLTE
Mixed propertyModels can be combined per room type if needed

Installation

Every phone is configured and tested before delivery. Installation is plug-and-play, with remote or on-site support and deployment guidance for hotel groups and renovation projects.

Order quantities and lead times

Standard products: minimum order 1 piece, lead time from 1 week. Customisation depends on complexity: rotary-dial inlay and speed-dial pre-programming from 20 pieces, a new plastic colour from 300 pieces, full custom from 500 pieces, with lead times of up to 6 months.

Not sure which one you need?

Tell us which phone system your hotel uses and we will confirm the right connection. Request a quote

Full technical details are on the Technical & Integration page.